Well pumps · Jackery HomePower 3000
How Long Will a Jackery HomePower 3000 Run a Well Pump?
About 2.6 h for a 1/3 hp well pump (EWEB figure, 1,000 W), by our math: 3,072 Wh × 0.85 ÷ 1,000 W. Across the cases below: 2.6 h to 3.5 h.
| Spec | Jackery HomePower 3000 |
|---|---|
| Battery | 3,072 Wh (maker spec) |
| Usable (× 0.85) | 2,611 Wh |
| Output / surge | 3,600 W / 7,200 W |
| Own draw | not listed |
| Solar input | 1,000 W |
| Price | $1,349 at Jackery |
Check HomePower 3000 price at JackeryPaid linkHomePower 3000 on AmazonPaid link
Well pump hours on the HomePower 3000
| Case | Watts | On the HomePower 3000 |
|---|---|---|
| Well pump (Idaho Power figure) (Idaho Power) | 750 W | 3.5 h |
| 1/3 hp well pump (EWEB figure) (EWEB) | 1,000 W | 2.6 h |
Wh × 0.85 ÷ (watts + the station’s own draw, where the maker lists it).
The pump only runs while water is drawn. Many well pumps run on 240 V and are wired into the panel; a station’s 120 V outlets can’t run a 240 V pump.
Can the HomePower 3000 start it?
EWEB’s chart lists about 3,000 W in total to start a 1/3 hp well pump (EWEB); Portland General Electric warns the start can reach six times the running watts (PGE). The HomePower 3000 has a 7,200 W surge. Well pump (Idaho Power figure): covers it; 1/3 hp well pump (EWEB figure): covers it.
How much an hour takes
An hour of a 1/3 hp well pump (EWEB figure) running nonstop uses about 1,000 Wh, about 38% of the HomePower 3000’s usable 2,611 Wh. At its 1,000 W solar input and our 75% assumption, strong sun puts about 750 Wh an hour back into the battery.
A wired-in pump needs a transfer switch installed by a professional; never connect a backup to house wiring yourself.
Well pump on similar stations
| Station | Capacity | 1/3 hp well pump (EWEB figure) | Price |
|---|---|---|---|
| BLUETTI Apex 300 | 2,765 Wh | 2.3 h | $1,499 |
| ALLPOWERS R4000 | 3,456 Wh | 2.9 h | $1,499 |
| EcoFlow DELTA 3 Max Plus | 2,048 Wh | 1.7 h | $1,199 |
| Anker SOLIX C2000 Gen 2 | 2,048 Wh | 1.7 h | $899.99 (Oct 24) |
Maker prices, Oct 26, 2026, unless dated. Checkout price applies.
More: Jackery HomePower 3000 specs and every runtime · Well pumps on every station · calculator for your own devices.
Quick answers
How long will the Jackery HomePower 3000 run a well pump?
About 2.6 h for a 1/3 hp well pump (EWEB figure, 1,000 W), by our math: 3,072 Wh × 0.85 ÷ 1,000 W.
Can the Jackery HomePower 3000 start a well pump?
EWEB’s chart lists about 3,000 W in total to start a 1/3 hp well pump; Portland General Electric warns the start can reach six times the running watts. The HomePower 3000 has a 7,200 W surge. Well pump (Idaho Power figure): covers it; 1/3 hp well pump (EWEB figure): covers it.
How long does the Jackery HomePower 3000 take to recharge with solar?
About 4.1 hours of strong sun from empty at its 1,000 W solar input, by our 75% assumption; clouds and winter sun add time.
“Paid link” = we earn a commission. Same math either way. See how we make money.