Sump pumps · BLUETTI Elite 100 V2
How Long Will a BLUETTI Elite 100 V2 Run a Sump Pump?
About 1.1 h for a 1/3 hp sump pump (800 W), by our math: 1,024 Wh × 0.85 ÷ (800 W + its 10 W own draw).
| Spec | BLUETTI Elite 100 V2 |
|---|---|
| Battery | 1,024 Wh (maker spec) |
| Usable (× 0.85) | 870 Wh |
| Output / surge | 1,800 W / not listed |
| Own draw | 10 W (maker) |
| Solar input | 1,000 W |
| Price | $489 at BLUETTI Pre-order · ships Nov 12 |
Check Elite 100 V2 price at BLUETTIPaid linkElite 100 V2 on AmazonPaid link
Sump pump hours on the Elite 100 V2
| Case | Watts | On the Elite 100 V2 |
|---|---|---|
| 1/3 hp sump pump (Honda) (EWEB) | 800 W | 1.1 h * |
| 1/2 hp sump pump (EWEB) | 1,050 W | May not start |
Wh × 0.85 ÷ (watts + the station’s own draw, where the maker lists it). * Covers the lower starting figure but not the higher one. The Elite 100 V2 is a pre-order; it ships Nov 12.
Hours are nonstop pumping; the pump only runs while water comes in, so in most storms it lasts much longer.
Can the Elite 100 V2 start it?
Generator charts list about 1,500–2,100 W in total to start a 1/3 hp pump and 2,100–3,250 W for 1/2 hp (Honda) (EWEB). The Elite 100 V2 has a 1,800 W output (no surge rating is listed). 1/3 hp sump pump: likely, but the start may be tight; 1/2 hp sump pump: may not start.
How much an hour takes
An hour of a 1/3 hp sump pump running nonstop uses about 800 Wh, about 92% of the Elite 100 V2’s usable 870 Wh. At its 1,000 W solar input and our 75% assumption, strong sun puts about 750 Wh an hour back into the battery.
Keep the station dry and above any flood level.
Sump pump on similar stations
| Station | Capacity | 1/3 hp sump pump | Price |
|---|---|---|---|
| Anker SOLIX C1000 Gen 2 | 1,024 Wh | 1.1 h | $499.99 |
| Jackery Explorer 1000 v2 | 1,070 Wh | 1.1 h | $499 |
| BLUETTI AC180 | 1,152 Wh | 1.2 h | $499 |
| ALLPOWERS R1500 | 1,152 Wh | 1.2 h | $539 |
Maker prices, Oct 26, 2026, unless dated. Checkout price applies.
More: BLUETTI Elite 100 V2 specs and every runtime · Sump pumps on every station · calculator for your own devices.
Quick answers
How long will the BLUETTI Elite 100 V2 run a sump pump?
About 1.1 h for a 1/3 hp sump pump (800 W), by our math: 1,024 Wh × 0.85 ÷ (800 W + its 10 W own draw).
Can the BLUETTI Elite 100 V2 start a sump pump?
Generator charts list about 1,500–2,100 W in total to start a 1/3 hp pump and 2,100–3,250 W for 1/2 hp. The Elite 100 V2 has a 1,800 W output (no surge rating is listed). 1/3 hp sump pump: likely, but the start may be tight; 1/2 hp sump pump: may not start.
How long does the BLUETTI Elite 100 V2 take to recharge with solar?
About 1.4 hours of strong sun from empty at its 1,000 W solar input, by our 75% assumption; clouds and winter sun add time.
“Paid link” = we earn a commission. Same math either way. See how we make money.