Sump pumps · BLUETTI Apex 300
How Long Will a BLUETTI Apex 300 Run a Sump Pump?
About 2.9 h for a 1/3 hp sump pump (800 W), by our math: 2,765 Wh × 0.85 ÷ (800 W + its 20 W own draw). Across the cases below: 2.2 h to 2.9 h.
| Spec | BLUETTI Apex 300 |
|---|---|
| Battery | 2,765 Wh (maker spec) |
| Usable (× 0.85) | 2,350 Wh |
| Output / surge | 3,840 W / not listed |
| Own draw | 20 W (maker) |
| Solar input | 2,400 W |
| Price | $1,499 at BLUETTI |
Check Apex 300 price at BLUETTIPaid linkApex 300 on AmazonPaid link
Sump pump hours on the Apex 300
| Case | Watts | On the Apex 300 |
|---|---|---|
| 1/3 hp sump pump (Honda) (EWEB) | 800 W | 2.9 h † |
| 1/2 hp sump pump (EWEB) | 1,050 W | 2.2 h † |
Wh × 0.85 ÷ (watts + the station’s own draw, where the maker lists it). † Its output covers the start, but no surge rating is listed.
Hours are nonstop pumping; the pump only runs while water comes in, so in most storms it lasts much longer.
Can the Apex 300 start it?
Generator charts list about 1,500–2,100 W in total to start a 1/3 hp pump and 2,100–3,250 W for 1/2 hp (Honda) (EWEB). The Apex 300 has a 3,840 W output (no surge rating is listed). 1/3 hp sump pump: likely, though no surge rating is listed; check with BLUETTI; 1/2 hp sump pump: likely, though no surge rating is listed; check with BLUETTI.
How much an hour takes
An hour of a 1/3 hp sump pump running nonstop uses about 800 Wh, about 34% of the Apex 300’s usable 2,350 Wh. At its 2,400 W solar input and our 75% assumption, strong sun puts about 1,800 Wh an hour back into the battery.
Keep the station dry and above any flood level.
Sump pump on similar stations
| Station | Capacity | 1/3 hp sump pump | Price |
|---|---|---|---|
| Jackery HomePower 3000 | 3,072 Wh | 3.3 h | $1,349 |
| ALLPOWERS R4000 | 3,456 Wh | 3.7 h | $1,499 |
| BLUETTI Elite 200 V2 | 2,074 Wh | 2.2 h | $899 |
| EcoFlow DELTA 3 Max Plus | 2,048 Wh | 2.2 h | $1,199 |
Maker prices, Oct 26, 2026, unless dated. Checkout price applies.
More: BLUETTI Apex 300 specs and every runtime · Sump pumps on every station · calculator for your own devices.
Quick answers
How long will the BLUETTI Apex 300 run a sump pump?
About 2.9 h for a 1/3 hp sump pump (800 W), by our math: 2,765 Wh × 0.85 ÷ (800 W + its 20 W own draw).
Can the BLUETTI Apex 300 start a sump pump?
Generator charts list about 1,500–2,100 W in total to start a 1/3 hp pump and 2,100–3,250 W for 1/2 hp. The Apex 300 has a 3,840 W output (no surge rating is listed). 1/3 hp sump pump: likely, though no surge rating is listed; check with BLUETTI; 1/2 hp sump pump: likely, though no surge rating is listed; check with BLUETTI.
How long does the BLUETTI Apex 300 take to recharge with solar?
About 1.5 hours of strong sun from empty at its 2,400 W solar input, by our 75% assumption; clouds and winter sun add time.
“Paid link” = we earn a commission. Same math either way. See how we make money.