Space heaters · Anker SOLIX C1000 Gen 2
How Long Will an Anker SOLIX C1000 Gen 2 Run a Space Heater?
About 35 min for a heater on high (1,500 W), by our math: 1,024 Wh × 0.85 ÷ 1,500 W. Across the cases below: 35 min to 1.2 h.
| Spec | Anker SOLIX C1000 Gen 2 |
|---|---|
| Battery | 1,024 Wh (maker spec) |
| Usable (× 0.85) | 870 Wh |
| Output / surge | 2,000 W / 3,000 W |
| Own draw | not listed |
| Solar input | 600 W |
| Price | $499.99 at Anker |
See the C1000 Gen 2 at AnkerC1000 Gen 2 on AmazonPaid link
Heater hours on the C1000 Gen 2
Wh × 0.85 ÷ (watts + the station’s own draw, where the maker lists it).
A heater turns electricity straight into heat, so its draw stays high the whole time.
How much one use takes
Ten minutes at 1,500 W uses about 250 Wh, about 29% of the C1000 Gen 2’s usable 870 Wh.
The CPSC says never to power a heater with an extension cord or power strip, and never to leave one running unattended or while you sleep. Heater makers say to plug into a wall outlet; check your heater’s manual before using a power station.
Heater on similar stations
| Station | Capacity | Heater on high | Price |
|---|---|---|---|
| BLUETTI Elite 100 V2 | 1,024 Wh | 35 min | $489 |
| Jackery Explorer 1000 v2 | 1,070 Wh | 36 min | $499 |
| BLUETTI AC180 | 1,152 Wh | 39 min | $499 |
| ALLPOWERS R1500 | 1,152 Wh | 39 min | $539 |
Maker prices, Oct 26, 2026, unless dated. Checkout price applies.
More: Anker SOLIX C1000 Gen 2 specs and every runtime · Space heaters on every station · calculator for your own devices.
Quick answers
How long will the Anker SOLIX C1000 Gen 2 run a space heater?
About 35 min for a heater on high (1,500 W), by our math: 1,024 Wh × 0.85 ÷ 1,500 W.
How long does the Anker SOLIX C1000 Gen 2 take to recharge with solar?
About 2.3 hours of strong sun from empty at its 600 W solar input, by our 75% assumption; clouds and winter sun add time.
“Paid link” = we earn a commission. Same math either way. See how we make money.