Furnace fans · Anker SOLIX C1000 Gen 2
How Long Will an Anker SOLIX C1000 Gen 2 Run a Furnace Fan?
About 52 min for a 1/3 hp furnace fan (Honda figure, 1,000 W), by our math: 1,024 Wh × 0.85 ÷ 1,000 W. Across the cases below: 44 min to 1.2 h.
| Spec | Anker SOLIX C1000 Gen 2 |
|---|---|
| Battery | 1,024 Wh (maker spec) |
| Usable (× 0.85) | 870 Wh |
| Output / surge | 2,000 W / 3,000 W |
| Own draw | not listed |
| Solar input | 600 W |
| Price | $499.99 at Anker |
See the C1000 Gen 2 at AnkerC1000 Gen 2 on AmazonPaid link
Furnace fan hours on the C1000 Gen 2
| Case | Watts | On the C1000 Gen 2 |
|---|---|---|
| 1/3 hp furnace fan (EWEB figure) (EWEB) | 700 W | 1.2 h |
| 1/3 hp furnace fan (Honda figure) (Honda) | 1,000 W | 52 min |
| 1/2 hp furnace fan (Honda) | 1,200 W | 44 min |
Wh × 0.85 ÷ (watts + the station’s own draw, where the maker lists it).
Hours are nonstop; the fan cycles with the thermostat, so real hours are longer.
Can the C1000 Gen 2 start it?
Honda lists 1,800 W to start a 1/3 hp furnace fan and 2,500 W for 1/2 hp (Honda); EWEB’s chart gives about 2,100 W for 1/3 hp (EWEB). The C1000 Gen 2 has a 3,000 W surge. 1/3 hp furnace fan (EWEB figure): covers it; 1/3 hp furnace fan (Honda figure): covers it; 1/2 hp furnace fan: covers it.
How much an hour takes
An hour of a 1/3 hp furnace fan (Honda figure) running nonstop uses about 1,000 Wh, more than the 870 Wh the C1000 Gen 2 can deliver, so it runs about 52 min. At its 600 W solar input and our 75% assumption, strong sun puts about 450 Wh an hour back into the battery.
A furnace wired into the panel needs a transfer switch installed by a professional; never connect a backup to house wiring yourself.
Furnace fan on similar stations
| Station | Capacity | 1/3 hp furnace fan (Honda figure) | Price |
|---|---|---|---|
| BLUETTI Elite 100 V2 | 1,024 Wh | 52 min | $489 |
| Jackery Explorer 1000 v2 | 1,070 Wh | 55 min | $499 |
| BLUETTI AC180 | 1,152 Wh | 58 min | $499 |
| ALLPOWERS R1500 | 1,152 Wh | 59 min | $539 |
Maker prices, Oct 26, 2026, unless dated. Checkout price applies.
More: Anker SOLIX C1000 Gen 2 specs and every runtime · Furnace fans on every station · calculator for your own devices.
Quick answers
How long will the Anker SOLIX C1000 Gen 2 run a furnace fan?
About 52 min for a 1/3 hp furnace fan (Honda figure, 1,000 W), by our math: 1,024 Wh × 0.85 ÷ 1,000 W.
Can the Anker SOLIX C1000 Gen 2 start a furnace fan?
Honda lists 1,800 W to start a 1/3 hp furnace fan and 2,500 W for 1/2 hp; EWEB’s chart gives about 2,100 W for 1/3 hp. The C1000 Gen 2 has a 3,000 W surge. 1/3 hp furnace fan (EWEB figure): covers it; 1/3 hp furnace fan (Honda figure): covers it; 1/2 hp furnace fan: covers it.
How long does the Anker SOLIX C1000 Gen 2 take to recharge with solar?
About 2.3 hours of strong sun from empty at its 600 W solar input, by our 75% assumption; clouds and winter sun add time.
“Paid link” = we earn a commission. Same math either way. See how we make money.