CPAP runtime · BLUETTI Elite 30 V2
How Long Will a BLUETTI Elite 30 V2 Run a CPAP?
About 7.9 h for an AirSense 10 with humidifier (22 W), by our math: 288 Wh × 0.85 ÷ (22 W + its 9 W own draw). Across the cases below: 5.7 h to 1.9 nights of 8 hours.
| Spec | BLUETTI Elite 30 V2 |
|---|---|
| Battery | 288 Wh (maker spec) |
| Usable (× 0.85) | 245 Wh |
| Output / surge | 600 W / not listed |
| Own draw | 9 W (maker) |
| Solar input | 200 W |
| Price | $289.99 at BLUETTI |
Check Elite 30 V2 price at BLUETTIPaid linkElite 30 V2 on AmazonPaid link
CPAP hours on the Elite 30 V2
| Case | Watts | On the Elite 30 V2 |
|---|---|---|
| AirSense 10 without humidifier (ResMed) | 7 W | 1.9 nights of 8 hours |
| AirSense 10 with humidifier (ResMed) | 22 W | 7.9 h |
| AirSense 10 with humidifier and heated tube (ResMed) | 34 W | 5.7 h |
Wh × 0.85 ÷ (watts + the station’s own draw, where the maker lists it).
ResMed measured these for the AirSense 10; higher pressure or humidity draws more. A DC cord from the CPAP maker skips the inverter and lasts longer.
Keeping it going with solar
A night with an AirSense 10 with humidifier uses about 176 Wh, about 292 Wh from the battery with its own 9 W draw. At the Elite 30 V2’s 200 W solar input and our 75% assumption, that is more than the 288 Wh battery holds, so the battery alone won’t cover it; a full charge from empty takes about 1.9 hours of strong sun. See solar recharge time.
Follow your doctor’s and the CPAP maker’s advice on backup power.
CPAP on similar stations
| Station | Capacity | AirSense 10 with humidifier | Price |
|---|---|---|---|
| EcoFlow RIVER 3 Plus | 286 Wh | 1.4 nights of 8 hours | $299 |
| Jackery Explorer 600 v2 | 640 Wh | 3.1 nights of 8 hours | $499 |
| Anker SOLIX C1000 Gen 2 | 1,024 Wh | 4.9 nights of 8 hours | $499.99 |
| BLUETTI Elite 100 V2 | 1,024 Wh | 3.4 nights of 8 hours | $489 |
Maker prices, Oct 26, 2026, unless dated. Checkout price applies.
More: BLUETTI Elite 30 V2 specs and every runtime · CPAP runtime on every station · calculator for your own devices.
Quick answers
How long will the BLUETTI Elite 30 V2 run a CPAP?
About 7.9 h for an AirSense 10 with humidifier (22 W), by our math: 288 Wh × 0.85 ÷ (22 W + its 9 W own draw).
How long does the BLUETTI Elite 30 V2 take to recharge with solar?
About 1.9 hours of strong sun from empty at its 200 W solar input, by our 75% assumption; clouds and winter sun add time.
“Paid link” = we earn a commission. Same math either way. See how we make money.